Two-channel remote control module Valcor VCH

0.00

The two-channel remote control module VCH is used for two-relay remote control of objects – different types of electronic locking systems, electromechanical locks; garage and portal doors; central locking of cars and others.

Clear
SKU: VCH Category:

People frequently buy this product with:

The two-channel remote control module VCH is used for two-relay remote control of objects – different types of electronic locking systems, electromechanical locks; garage and portal doors; central locking of cars and others.

The set includes:

  • single-relay module Valcor VCH,
  • remote control 1 piece Valcor TX33,
  • documentation for installation and operation.

From Product Options you can choose:

– how many volts should the module be – 12V or 24V,

Valcor VCH has extremely high flexibility, five operating modes, programmable functions, reliability and security with the use of a remote control with dynamic code. One remote control is included in the set. The module is controlled with up to 14 remote controls. If you lose the remote control, all you have to do is delete all the remotes from the module’s memory and save only the available ones, so the lost remote control will no longer be able to control the module.

  1. Operating mode 1 – time control. In this mode, when button 1 is pressed, relay 1 is activated for a pre-programmed time (0.7 sec. – 4 min.), After which it switches off. When button 2 is pressed, relay 2 trips at the same time and switches off. When one relay is switched on, the other is automatically switched off. Application: Used to control central locks, electromechanical locks, garage doors, rolling shutters and others with reversible motors with unambiguous action control, eg button 1 locks, button 2 unlocks.
  2. Operating mode 2 – with hold. In this mode, relay 1 is switched on for the time for which button 1 has been pressed, and by releasing the button, the relay is also switched off. Relay 2 is controlled in the same way by button 2. The relays operate independently of each other.
  3. Operating mode 3 – with triggering. In this mode, by pressing button 1 once, relay 1 is switched ON. To switch OFF – button 1 must be pressed again. Relay 2 is switched with button 2. The relays operate independently of each other.
  4. Operating mode 4 – with switching. In this mode, one relay always remains on. With button 1 relay 1 is switched on and relay 2 is switched off, and with button 2 relay 2 is switched on and relay 1 is switched off.
  5. Operating mode 5 – during trigger time. In this mode, when the button is pressed, relay 1 is activated for the preset time. After this time has elapsed, and the button is pressed again- relay 2 will be switched on for the preset. Then the cycle repeats. If the button is pressed during operation of one relay, it causes the relay to stop (switch off), and when the button is pressed again, the other relay will be activated. Application: This mode is used to control garage doors, rolling shutters and other objects with reversible motors, and can be combined with one remote control to independently up to three doors.

Attention: Regardless of which operating mode you are in from 1 to 4, pressing button 3 of the remote control switches off both relays (STOP button)!

  1. Remote control with button– not used for modes 1, 2 and 3. In mode 4 when the button is pressed (the BUT input is given briefly at -12V) the relays switch. In mode 5, pressing a button (the BUT input is given briefly at -12V) plays the role of a button pressed by the remote control.

 

Additional information

Weight 0.200 kg
Dimensions 10 × 7 × 7 cm
SKU:

VCH

Size of the controller

75/57/30 mm

Chanels available

2

Type of electric key

Type of Mounting

,

Power supply

12V

Operation current

At work – max.100mA
At rest – max. 15mA

Range

up to 100 meters

Programmable operation modes

five

Included

1 Remote Control

Manufacturer

LESI-2000 Ltd, Bulgaria

Name from the manufacturer

Valcor VCH

Main Menu